Setup
1. 2 T3-1B blades on different chassis. Patch the firmware. Install LDOM 2.1 software.
2. SAN Connected storage via MPXIO (EMC SAN)
3. Solaris 10/9 installed with End User Option.
Create install User
useradd -u 0 -o -g 1 -c "Install user" -d / -s /bin/true install
Patch LDOM.
Download the following Patches from oracle
• 117837-05: C++ compiler optimizer patch
• 117846-08: C++ compiler Optimization patch
• 118682-01
• 127111-02 SunOS 5.10: libc patch (this should already exist if LDOM is patched)
• 137111-04 SunOS 5.10: kernel patch (this should already exist if LDOM is patched)
Profile Settings
• On a new system, set the following in /etc/profile
a. MANPATH=/usr/man:/usr/local/man:/usr/sfw/man:$MANPATH
• Create the oracle required users & groups
groupadd -g 102 dba
groupadd -g 103 oinstall
projadd -p 102 -c "Oracle Project" group.dba
useradd -u 101 -g dba -G oinstall -s /usr/bin/bash -c "Oracle User" -m –p 102 oracle
• Set the Oracle password
passwd -r files oracle
• Add the following entries to /etc/system for a 4G SGA or less. Shmmax should always be greater than SGA size.
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967296
set shmsys:shminfo_shmmni=100
set rlim_fd_max=65636
set rlim_fd_cur=4096
Reboot the system after the above /etc/system have been made.
Alternate way
Run prctl to make changes to the existing install so that a reboot is not required. These should be run as root. These changes don’t persist after a reboot.
prctl -n project.max-shm-memory -v 4gb -r -i project user.root
prctl -n project.max-sem-ids -v 256 -r -i project user.root
Project Settings
Make changes to the project so that changes persist for shm memory & sem ids (4G or less SGA). These should be run as root.
projmod -sK "project.max-shm-memory=(privileged,4G,deny)" group.dba
projmod -sK "project.max-sem-ids=(privileged,256,deny)" group.dba
/etc/project looks like this after changes:
[root@orc11gtest]# cat /etc/project
system:0::::
user.root:1::::
noproject:2::::
default:3::::
group.staff:10::::
group.dba:102:Oracle Project:oracle::project.max-sem-ids=(privileged,256,deny);project.max-shm-memory=(privileged,4294967296,deny)
Verify the changes applied to the oracle user as below.
[oracle@orc11gtest]$ prctl -n project.max-shm-memory -i process $$
process: 2834: -bash
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 4.00GB - deny -
[oracle@orc11gtest]$ prctl -n project.max-sem-ids -i process $$
process: 2834: -bash
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-sem-ids
privileged 256 - deny
Patch Check:
patchadd -p | grep 125555-03
patchadd -p | grep 140796-01
patchadd -p | grep 140899-01
patchadd -p | grep 141016-01
patchadd -p | grep 139555-08
patchadd -p | grep 141414-02 (Replaced by 141444-09)
patchadd -p | grep 141736-05
patchadd -p | grep 120753-06
patchadd -p | grep 139574-03
patchadd -p | grep 141414-10
patchadd -p | grep 141736-05
I'm using Ops center to create LDOMs to make my life a little easier. If you're doing this, the Vnets sometimes will be different between the 2 blades. Go into the "/guests/
< idx >3< /idx >number to match on both nodes.
NTP Configuration
Make sure to set the /etc/inet/ntp.conf with slewalways and disable p11.
server < serverip >
driftfile /etc/ntp.drift
slewalways yes
disable pll
Grid Software Install
ON each Control Domain -- add the disks for OVD, OCR & Data to the LDOMs. Make sure to add them in the same order, and set the same ID. A good way to make sure everything is the same on both nodes, is to also volume label the disks on the control / IO domain before assigning it to the LDOM.
Have xwin running and kick off the installer. Before you kick off the installer, its a good idea to run cluster verify tool.
./runcluvfy.sh stage -pre crsinst -n orczone1,orczone2 -verbose
Install any packages that are missing, fix the swap or any such thing, the MTUs etc, and you're ready to roll.
To add Swap Space when using ZFS
To create swap space on a ZFS volume (created 2 2g volumes):
zfs create -V 2gb rpool/swap2g
zfs create -V 2gb orcinstall/swap2g
Add it to swap
swap -a /dev/zvol/dsk/rpool/swap2g
swap -a /dev/zvol/dsk/orcinstall/swap2g
Add it to /etc/vfstab
/dev/zvol/dsk/rpool/swap2g - - swap - no -
/dev/zvol/dsk/orcinstall/swap2g - - swap - no -
Install / Troubleshooting Notes
1. A group called "DATA" was created by a previous install, and even though I zapped the disks, the group didnt go away. To drop the diskgroup (which wouldn't mount or come online) I had to do this:
drop diskgroup data force including contents;
2. If you're having trouble with ulimits and such, this link: Max user processes is pretty helpful.
